Microtek ScanMaker 6100 Pro, User Manual

Page: 68 / 162

Advanced Control Panel
Scan Job Queue Window
The Scan Job Queue window is a floating window that shows your
scan jobs. A scan job contains the following elements: a set of
scanning parameters (shown in the Settings window); a scan frame
(shown in the Preview window); and a scan job item (shown in the
Scan Job Queue window).
You can assign or create as many scan jobs as you need. However,
the more scan jobs there are, the longer the scanner time will be
(unless you enable the "One-pass Scan for Multiple Scan Jobs"
option).
Note : If the Scan Job Queue window is closed, go to the View menu
in the Preview window, and choose the Show Scan Job Queue
window command.
One-pass Scan for Multiple Scan Jobs
(for Windows only)
If this option is unchecked, when you assign multiple scan jobs in
the preview window, the scanner will continuously scan for several
passes, depending on the number of scan jobs that are selected.
For instance, assuming that there are three scan jobs selected, the
scanner performs the first job, and as the scanner carriage returns
to the stand-by position, the scan for the second job begins, and so
forth to the third job -- for a total of three passes.
If this option is checked, the scanner performs scanning in a single
pass for all the selected scan jobs. The scanner's carriage moves
only once and when it returns to the stand-by position, ScanWizard
5 then starts to process and finish all of the scan jobs.
To use the "One-pass Scan for Multiple Jobs", the image original
should meet the following conditions:
1. For all the scan jobs, the "resolution x scale" value in the