Microtek ScanMaker 6100 Pro, User Manual

Page: 30 / 162

Only one scanner can be accessed at a time. To switch among
various scanners, select the scanner to be used.
Get Current Scanner Info
This command provides information about your current scanner.
When you choose this command, a dialog box appears showing the
scanner model, Scanner ID number, and firmware version.
Scanner Probe
This command displays the detected scanner devices.
If your scanner does not show in the list, make sure your scanner is
connected and turned on, then click on the Probe button in the
dialog box.
Scanner Driver Manager
(for Macintosh only)
The Scanner Driver Manager keeps track of the scanners being used
on your system and the interface bus/ID numbers occupied by the
scanners. By keeping a record of this information, the Scanner
Driver Manager allows ScanWizard 5 to start up more quickly, as
there is no need to look for devices on the other interface buses.
To find a scanner:
Follow the hardware installation instructions for connecting a
scanner to your system. Then you can use the Scanner Driver
Manager in ScanWizard 5 to find the connected scanner in your
scanner list.
1. Go to the Scanner menu in the Preview window, and choose
Scanner Driver Manager. A dialog box will appear showing the
connected scanner and the corresponding interface ID
number.
2. Click the Find Scanners button. In case you have added new