Configuring Your Network Adapter for GigE Visionscape
GigE Net
w
ork
Configuration
A
Getting Started with Visionscape GigE Cameras
A-3
Important:
If you are using a third-party camera and you have installed
that manufacturer’s control software make sure that you disable it in the
Properties dialog below. It will almost certainly conflict with the JAI
software that Visionscape uses to receive images from the cameras.
In the example above, note the two check boxes at the bottom of the
dialog box. If you have these checked then you will see a small icon for
each NIC in the task bar. This is a useful visual indicator of network
status.
