Chapter
3
Advanced Tool Tutorials
3-44
Getting Started with Visionscape GigE Cameras
Visionscape
®
to a location other than C:\Vscape, replace it with
the appropriate drive and directory designation.
7.
Right click Snapshot in the Step Tree (left pane) and select Insert
Into. FrontRunner™ displays the Insert Step window. Click the
Program Control tab. Double click Trajectory Step to add it to the Job.
Note:
FrontRunner™ automatically inserts the Data Array, With, If,
and One Point Locator steps into the Trajectory Step.
8.
Right click Trajectory Step and select Insert Into. FrontRunner™
displays the Insert Step window. Click the Analysis Tools tab. Double
click Blob Tool to add it to the Job.
Note:
FrontRunner™ will automatically insert the Blob Tool into the
One Point Locator of the Trajectory Step.
9.
Right click Trajectory Step and select Insert Into. FrontRunner™
displays the Insert Step window. Click the Program Control tab.
Double click Trajectory Grid Setup to add it to the Job.
The Job you created should look like the Job displayed in Figure
3–32.
FIGURE 3–32.
Trajectory Tool Job Tree
