Microscan Quadrus MINI Imager, User Manual

Page: 61 / 398

Quadrus MINI Imager User’s Manual
3-17
Communications
Daisy Chain ID Status
Note:
Enable/disable and length must be the same in all readers.
Daisy Chain ID
Important:
The ASCII characters
<
,
>
, and
,
can only be entered as hex pairs:
For
<
:
<K101h,,,,,,,3C>
For
>
:
<K101h,,,,,,,3E>
For
,
:
<K101h,,,,,,,2C>
See
ASCII Character Entry Modifier
on page 3-32 for a detailed explanation of how to
enter ASCII characters as hex values.
Usage: Used in a daisy chain setup in cases where the host needs to know which
reader in the chain sent the data.
Definition: Each reader in a daisy chain can be assigned a one or two character ID
that will appear in front of decoded data and identify its source.
Serial Cmd:
<
K101,
aux port mode,baud rate,parity,stop bits,data bits,
daisy chain i.d.
status
, daisy chain i.d. >
Default:
Disabled
Options:
0 = Disabled
1 = Enabled
Usage: Used in a daisy chain setup in cases where the host needs to know which
reader in the chain sent the data.
Definition:
A one or two character prefix which identifies the particular daisy chain
reader from which the data is being sent to the host.
Serial Cmd:
<
K101,
aux port mode,baud rate,parity,stop bits,data bits,daisy chain i.d.
status,
daisy chain i.d.
>
Default:
1/
Options: Any one or two ASCII characters.