Microscan Quadrus MINI Imager, User Manual

Page: 25 / 398

Quadrus MINI Imager User’s Manual
1-13
Quick Start
Step 10 — Configure the Imager in ESP
To make setup changes to Quadrus MINI, click the
App Mode
button.
The following modes are accessible by clicking the buttons in the first row of
App Mode
icons:
• Click the
Autoconnect
button to establish communications between
ESP
and the imager.
• Click the
Send/Recv
button to send or receive commands.
• Click the
Camera
button to access a live Video view, Evaluate image captures, Calibrate
the imager, set the Window of Interest, fine-tune capture settings and processing settings
in the Configuration Database, and control multiple read cycle functions in Dynamic Setup.
• Click the
Terminal
button to display decoded symbol data, and to send serial commands
to the imager using text or macros.
• Click the
Utilities
button to test Read Rate, request or clear Counters, enable or disable
the imager or send output pulses in Device Control, determine the Differences from
Default in the current settings, add or remove master symbol data in Master Database,
and verify or update the imager’s Firmware.
• Click the
Output Format
button to determine the order and content of data output.
Click the
Configuration
button to display the second row of
ESP
icons.
From here you can make changes in the tree controls that can be accessed by clicking the
buttons on the second row of icons in the
ESP
window.
For further details, see
Microscan ESP Help
in the dropdown Help menu.