Microscan Quadrus MINI Imager, User Manual

Page: 217 / 398

Quadrus MINI Imager User’s Manual
7-37
I/O Parameters
ISO/IEC 16022 Symbol Quality Output 1
Note: Output On
under
Output 1 Parameters
must be set to
Symbol Quality
for this
output to function.
Note: ISO/IEC 16022 Symbol Quality Output 1
is not supported when
Q-Mode
is enabled.
Under
Output 1 Parameters
, expand the
Symbol Quality (ISO/IEC 16022)
tree.
Output on Symbol Contrast
Output on Print Growth
Usage:
Lets the user know if symbol quality is less than acceptable.
Definition: If enabled, toggles Output 1 to an active state when
Symbol Contrast
Threshold
is met.
Serial Cmd: <
K800,output on symbol contrast
,symbol contrast threshold,output on print
growth,print growth threshold,output on axial non-uniformity,axial non-uniformity
threshold,output on UEC,UEC threshold >
Default:
Disabled
Options:
0 = Disabled
1 = Enabled
Usage: Lets the user know if symbol quality is less than acceptable.
Definition:
If enabled, toggles
Output 1
to an active state when
Print Growth Threshold
is met.
Serial Cmd: <
K800,
output on symbol contrast,symbol contrast threshold,
output on print
growth
,print growth threshold,output on axial non-uniformity,axial non-uniformity
threshold,output on UEC,UEC threshold >
Default:
Disabled
Options:
0 = Disabled
1 = Enabled