Microscan Quadrus MINI Imager, User Manual

Page: 35 / 398

Quadrus MINI Imager User’s Manual
2-9
Using ESP
Preferences > Advanced Tab
The
Auto Sync
options at the top of the
Advanced
tab allow you to determine whether
Auto Sync will be enabled automatically in sections of
ESP
where it is used, or if it will ask
you before it enables Auto Sync functions.
Always Ask Before Auto Sync Occurs
If you check this option box, you are then able to determine what specific Auto Sync
functions will be enabled.
Receive Settings from the Reader
will automatically send the
imager’s settings to
ESP
when Auto Sync is enabled.
Send ESP Settings to the Reader
will automatically send all imager configuration settings chosen in
ESP
to the imager.
Do
Not Send or Receive Settings
creates a condition in which Auto Sync will not automatically
send imager settings to
ESP
, or send
ESP
settings to the imager.
Show Target Pattern During Locate
Allows you to determine whether the blue LED target pattern will be on or off during the
Locate
routine.
Show Target Pattern During Calibrate
Allows you to determine whether the blue LED target pattern will be on or off during the
Calibrate
routine.
Use Higher Quality Images
Sets
ESP
to output images at a higher resolution than standard JPEG format.
Open Image after Save
When
Open Image after Save
is enabled,
ESP
automatically opens saved image captures.
Images can be saved from the
Evaluation
tab in the
Camera
view, or by right clicking an
image in any other image capture view and then saving.
Send XON with Autoconnect
Sends an
XON
(
Begin Transmission
) command to the imager before starting the
Autoconnect
routine.