Microscan Quadrus MINI Imager, User Manual

Page: 230 / 398

7-50
Quadrus MINI Imager User’s Manual
Database Identifier Output
Database Identifier Output
Output Status
Disabled
When this command is disabled, no database identifier information will be output.
Enabled
When this command is enabled, the imager will append a two-digit number and the char-
acters “DB” to the data output following the separator for each symbol decoded using
Configuration Database
. For example, if the separator is an underscore character and
the second database entry reads a symbol encoded with “data capture” during the read
cycle, the symbol data output will be “data capture_DB02”. If the database is not active, no
identifiers will be attached to output.
Separator
Important:
The ASCII characters
<
,
>
, and
,
can only be entered as hex pairs:
For
<
:
<K759h,,3C>
For
>
:
<K759h,,3E>
For
,
:
<K759h,,2C>
See
ASCII Character Entry Modifier
on page 3-32 for a detailed explanation of how to
enter ASCII characters as hex values.
Usage: Useful in keeping track of which database entries read which symbols.
Serial Cmd: <
K759,status
,separator >
Default:
0
Options:
0 = Disabled
1 = Enabled
Usage: The separator character separates the symbol data from the database identifier.
Serial Cmd: <
K759,
status,
separator
>
Default:
<space>
Options: Any ASCII character.