Microscan Quadrus MINI Imager, User Manual

Page: 196 / 398

7-16
Quadrus MINI Imager User’s Manual
2D Symbology Qualification
Orientation Mode
Disabled
Decoded messages are output, but no attempt is made to qualify symbols or to output
Bad Symbol
or
No Symbol
messages.
Bad/No Symbol Output
Checks first for decodes. If no symbol is decoded, checks for symbol orientation. If
Orientation
Value
is satisfied, a
Bad Symbol
message is output. If not satisfied, a
No Symbol
message
is output.
Object Qualification
Checks first for matches to symbol
Orientation Value
. If qualified, attempts to decode. If
no decodes are found within the specified read cycle parameters, outputs a
No Read
message.
Enable Both
Same as
Object Qualification
, except that if
Orientation Value
is satisfied but the symbol
is not decoded, then a
Bad Symbol
message is output; if
not
satisfied, a
Bad Symbol
message is still output.
Definition: Sets the orientation value.
Serial Cmd: <
K718,
finder pattern status,symbol size mode,symbol size 1,symbol size
2,symbol size tolerance,dimension mode,dimension 1,dimension 2,dimension
tolerance,
orientation mode
,orientation value >
Default:
Disabled
Options:
0 = Disabled
1 = Bad/No Symbol Output
2 = Object Qualification
3 = Enable Both