Microscan Quadrus MINI Imager, User Manual

Page: 352 / 398

14-4
Quadrus MINI Imager User’s Manual
Format Assign
Format Assign
Symbol Number
Status
Format Assign by ESP
Definition:
Symbol Number
refers to the number of the symbol to which output formatting
will apply. For example, if you wish to enable user-defined formatting to
symbol # 2 in a multisymbol read cycle, you would send the command
<K742,2,1>
.
Note that the number of symbols may exceed the format capabilities.
Serial Cmd: <
K742
,
symbol number
,status>
Options: 1 to 10
1 = Formatted output status for symbol # 1.
2 = Formatted output status for symbol # 2.
...
10 = Formatted output status for symbol # 10.
Definition:
Status
refers to the user-defined formatting of a selected symbol position in
the read cycle result. Note that there is also a global formatting “enable”
command that must be set for the formatting to be applied.
Serial Cmd: <
K742
, symbol number,
status
>
Default:
Disabled
Options:
0 = Disabled
1 = Enabled (Assign parameters to specified symbol.)
Then check the
Parse
boxes beneath
the symbols that you wish to format
for user-defined output.
Use the
Set Number of Symbols
spin box to
determine the number of symbols to be included
in the output phrase.