Microplex SOLID T11 DT Operator'S Manual Download Page 94

Page: 94 / 135

94 Panel Functions

________________________________________________________________________________________________

_______________________________________________________________________________________________

MICROPLEX

Operator’s Manual SOLID T11 DT / TT

Edition 1.1

7.32. Selecting the Print Mode

With this function the procedure for the label output and print is defined.
The different print modes are described on the following pages.

LINE

ENTER

FEED

EN TE R

LINE

Panel display

[ON LINE ]

[OFF LINE ]

[Menu Level 1 ]

[Engine ]

[Printspeed ]

[TearOff Menu ]

[TearOff Mode ]

[Print Mode ]

[Real 1:1 Mode ]

[Normal 1:1 Mode ]

[Save as Setup? ]

Notes

Turn the printer OFF LINE with this
key.

The ENTER key gives the user access
to the menu structure.

Press the NEXT or PREVIOUS key until
[Engine ] is displayed.

Press the NEXT or PREVIOUS key
until [TearOff Menu ] is displayed.

Press the NEXT or PREVIOUS key
until [Print Mode ] is displayed.

The currently set print mode is
displayed.

Press the NEXT or PREVIOUS key until
the desired print mode is displayed.

The Normal 1:1 mode is selected.

In addition this new value can be
saved as setup value (using the ENTER
key).
After this decision turn the printer ON
LINE again: Press the LINE key.

Summary of Contents for SOLID T11 DT








































































































































Search results

Summary of Contents for SOLID T11 DT

Reviews:

Related manuals for SOLID T11 DT

Brands by name

Popular brands

Microplex SOLID T11 DT, Operator'S Manual

Search results

Summary of Contents for SOLID T11 DT

Reviews:

Related manuals for SOLID T11 DT

Brands by name

Popular brands