Microplex SOLID T11 DT Operator'S Manual Download Page 69

Page: 69 / 135

Panel Functions

________________________________________________________________________________________________

_______________________________________________________________________________________________

MICROPLEX

Operator’s Manual SOLID T11 DT / TT

Edition 1.1

7.19. Font Selection

This function selects the active font. Select font number out of the list
of available fonts.

LINE

ENTER

FEED

EN TE R

LINE

Panel display

[ON LINE ]

[OFF LINE ]

[Menu Level 1 ]

[Page Menu ]

[Font Number ]

[Font 600 ]

[Font 5507 ]

[Save as Setup? ]

Notes

Turn the printer OFF LINE with this
key.

The ENTER key gives the user access
to the menu structure.

Press the NEXT or PREVIOUS key
until [Page Menu ] is displayed.

Press the NEXT or PREVIOUS key
until the desired font number (e.g.
5507 Langeoog) is displayed.

The font number 5507 Langeoog is
selected.

In addition this new value can be
saved as setup value (using the
ENTER key).
After this decision turn the printer
ON LINE again: Press the LINE key.

Summary of Contents for SOLID T11 DT








































































































































Search results

Summary of Contents for SOLID T11 DT

Reviews:

Brands by name

Popular brands

Microplex SOLID T11 DT, Operator'S Manual

Search results

Summary of Contents for SOLID T11 DT

Reviews:

Brands by name

Popular brands