Panel Functions
53
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T11 DT / TT
Edition 1.1
7.5. Configuration of Text Margins
This function sets text margins. Margins are expressed in dots at
the concerning edge of the paper.
LINE
ENTER
»
ENTER
»
ENTER
»
ENTER
»
ENTER
FEED
EN TE R
LINE
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1 ]
$
$
$
[Page Menu ]
[Font Number ]
$
$
$
[Margin ]
[Left ]
$
$
$
[from Right ]
[Digit4 0081]
$
$
$
[Digit1 0087]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this key.
The ENTER key gives the user access to
the menu structure.
Press the NEXT or PREVIOUS key until
[Page Menu ] is displayed.
Press the NEXT or PREVIOUS key until
[Margin ] is displayed.
Press the NEXT or PREVIOUS key until the
desired margin is displayed.
Pressing the NEXT or PREVIOUS key
changes the value of the current digit
(Digit4 = left position, in this example: 0).
Pressing the ENTER key moves you to the
next digit (the FEED key moves you back,
if need be).
The right margin is changed into 87 dot.
In addition this new value can be saved as
setup value (using the ENTER key).
After this decision turn the printer ON
LINE again: Press the LINE key.
