108 Operator Maintenance
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T11 DT / TT
Edition 1.1
8.1.3. Platen and Roller Cleaning
The printer’s transport rollers (platen roller and transport rollers) can
be soiled by the print media (e.g. with adhesive residues).
For the following cleaning operations the hints of section 8.1.2 are
valid, too !
1.
Turn the printer off.
2.
Open the top cover of the printer.
3.
Open the printhead assembly by pulling the head latch toward
the front of the printer.
The print head assembly is spring-loaded and will automatically
open as soon as the head latch is disengaged.
4.
Rotate the printhead assembly up and to the rear to give access to
the platen.
5.
Lift up on both ends of the label cover plate at the points marked
with the purple arrows until it releases.
Fig. 8.1.3.a Lifting the label cover plate
Lift the label
cover plate
Label cover
plate