24 Handling of Consumables
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T11 DT / TT
Edition 1.1
5.1. Winding Diagram
Fig. 5.1.a Winding directions of material and ribbon (ink inside the roll)
The diagram above shows the usual winding directions of material and ribbon
for the SOLID T11 TT, the
thermal transfer version
of the SOLID T11.
SOLID T11 DT printers have a similar paper path (just as shown in the
figure above) — but all the ribbon spindles and so on are not existing in that
device.
Pay attention to the diagram located on the inside of the printer’s top cover,
too.
ribbon take up spindles
ribbon supply spindles
