Panel Functions
75
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T11 DT / TT
Edition 1.1
7.23. Contrast (Density) Setting
Using this function the print density (contrast) of the printed characters
can be changed.
LINE
ENTER
»
ENTER
»
ENTER
»
ENTER
FEED
EN TE R
LINE
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1 ]
$
$
$
[Engine ]
[Printspeed ]
$
$
$
[Contrast ]
[Contrast: 85 % ]
$
$
$
[Contrast: 60 % ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
The ENTER key gives the user access
to the menu structure.
Press the NEXT or PREVIOUS key until
[Engine ] is displayed.
Press the NEXT or PREVIOUS key until
[Contrast ] is displayed.
The currently set value is displayed.
Press the NEXT or PREVIOUS key to
change the contrast.
Values from 10% to 120% are
settable *.
The contrast is reduced to 60 % (the
density is decreased).
In addition this new value can be
saved as setup value (using the ENTER
key).
After this decision turn the printer ON
LINE again: Press the LINE key.
* Note:
Please consider that using high contrast values (more than 100%) can
result in a reduced lifetime of the printhead.
