52 Panel Functions
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T11 DT / TT
Edition 1.1
7.4. Material Width Adjustment (Paper Width)
The paper width (print width) has to be adjusted with this function
according to the currently used format.
LINE
ENTER
»
ENTER
ENTER
»
ENTER
ENTER
»
ENTER
FEED
EN TE R
LINE
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1 ]
$
$
$
[Paper Menu ]
[Paper Size ]
[Page Length ]
$
$
$
[Paper Width ]
[in mm ]
$
$
$
[Digit4 108.4]
$
$
$
[Digit1 108.0]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this key.
The ENTER key gives the user access to the menu
structure.
Press the NEXT or PREVIOUS key until
[Paper Menu ] is displayed.
Press the ENTER key to select the paper menu.
Press the ENTER key to select the paper size menu.
Press the NEXT or PREVIOUS key until
[Paper Width ] is displayed.
Press the ENTER key to adjust the format width to
the paper width.
mm = currently selected measuring unit.
(Alternative the units inch or dot can be chosen
with NEXT or PREVIOUS).
Pressing the NEXT or PREVIOUS key changes the
value of the current digit (Digit4 = left position, in
this example: 1). Pressing the ENTER key moves
you to the next digit (the FEED key moves you
back, if need be).
The format width (paper width) is changed to
108.0 mm.
In addition this new value can be saved as setup
value (using the ENTER key).
After this decision turn the printer ON LINE again:
Press the LINE key.
