MicroNet SP6824P, User Manual

Page: 69 / 80

69
Commands Description Syntax
4.1) dos ports smurf
This command enables and disables
Smurf-TYPR attack prevention.
dos ports smurf {enable|disable}
Global Config
4.2)dos ports ping-flooding
This command enables and disables
ping-flooding-type attack prevention. dos ports ping-flooding {enable|disable}
Global Config
4.3)dos ports synack-flooding
This command enables and disables
SYNACK -flooding -type attack
prevention. Set rate is 64 kbps or
128kbps for port lists (1, 3-5, 7-9.11)
Format dos ports synack -flooding
{enable|disable} rate {64|128}
<port-list>
Mode Global Config
e.g.
Switch<Config>#dos ports synack
-flooding enablerate 64 1-4
Switch<Config>#dos ports synack
-flooding enablerate 64 5
1) tacplus authen_type
This command is used to set
authentication type. There are three
types for selecting: local, tacplus,
localandtacplus
tacplus authen_type {local | tacplus |
localandtacplus}
obal Config
2) tacplus add
This command is used to add a new
server and set server IP
address, priority, key string,
authentication port and timeout for
reply
tacplus add server <IP_addr> priority
<0-65535> key <key string> port <auth
port id> timeout <1-30>
bal Config
tacplus
3) tacplus del
This command is used to delete a
server.
Format tacplus del server <IP_addr>
Mode Global Config
green-eth
This command is used to
enable/disable green Ethernet
function. Enable green Ethernet
mode will reduce system power
consumption when the link is not
present.
Format green-eth { enable | disable }
Mode Global Config
1)dhcpsnooping enable
This command is used to enable
dhcp snooping functions.
Format dhcpsnooping enable
Mode Global Config
2)dhcpsnooping disable
This command is used to disable
dhcp snooping functions.
Format dhcpsnooping enable
Mode Global Config
3)dhcpsnooping option82
This command is used to set
option82 packets.
Format dhcpsnooping option82
{enable|disable}
Mode Global Config
4)dhcpsnooping verifymac enable
This command is used to set verify
mac address
Format dhcpsnooping
verifymac{enable|disable}
Mode Global Config
5)dhcpsnooping ports
This command is used to set ports to trust or untrust.
5.1)dhcpsnooping ports trust
This command is used to set ports to
trust
Format dhcpsnooping ports trust
<port-list>
Mode Global Config
5.2)dhcpsnooping ports untrust
This command is used to set ports to
untrust
Format dhcpsnooping ports untrust
<port-list>
Mode Global Config
Dhcpsnoo
ping
6)dhcpsnooping vlan
This command is used to configure dhcp vlan.