MicroNet SP6824P, User Manual

Page: 58 / 80

58
Commands Description Syntax
6) lldp notify-interval
This command is used to specify
notification interval in seconds
Format lldp notify-interval <5-3600>
Mode Global Config
7) lldp reinit-delay
This command is used to specify
re-initialization delay in seconds
Format lldp reinit-delay <1-10>
Mode Global Config
8) lldp tx-delay
Transmit Delay in seconds
Format lldp tx-delay <1-8192>
Mode Global Config
9) lldp mgmt-addrtxport
A range of ports can be set.
Format lldp mgmt-addrtxport ports <port
list>
Mode Global Config
e.g.
switch(config)# lldp mgmt-addrtxport ports
1
switch(config)# lldp mgmt-addrtxport ports
1-4
This command is used to configure log server
1) log log-server
This command is used to configure log server
1.1) log log-server name
<WORD>add
This command is used to specify log
server name, enter a name, up to 12
characters, add a log server IP
address
Format log log-server name < WORD >
add ipaddr word
Mode Global Config
1.2) log log-server name <word>
delete
This command is used to delete a log
server
Format log log-server name < WORD >
delete
Mode Global Config
2) log logging-target
This command is used to configure log notification level
2.1) log logging-target memory
This command is used to specify
memory log notify-level
Format log logging-target memory
{enable|disable}
Mode Global Config
2.2) log logging-target flash
This command is used to specify
flash log notify-level
Format log logging-target flash
{enable|disable}
Mode Privileged Mode
2.3) log logging-target console
This command is used to specify
console log notify-level
Format log logging-target console
{enable|disable}
Mode Global Config
log
2.4) log logging-target server
This command is used to specify
console log notify-level
Format log logging-target server name
< WORD > {enable|disable}
Mode Global Config
radius-ser
ver
This command is used to configure
radius server Format radius-server ip < IP addr >
Mode Global Config
This command is used to specify static address
1) static-address add
This command is used to add static
mac address
Format static-address add < mac addr >
vid < vlan-ID > port < port-ID >
Mode Global Config
static-addr
ess
2) static-address delete
This command is used to delete static
mac address
Format static-address delete <mac
addr > vid <vlan -ID >
Mode Global Config
mgmt-acc
esslist
1) mgmt-accesslist ipaddr
This command specifies a
management access IP for the DUT,
up to 8 IP address can be set.
Format mgmt-accesslist ipaddr < IP
addr >
Mode Global Config