MicroNet SP6824P, User Manual

Page: 73 / 80

73
Commands Description Syntax
speed
Set port speed to 10Mbps half duplex/
10Mbps full/ 100Mbps half/ 100Mbps
full/ 1000Mbps 100FX
mode/1000base-x full speed {10hd | 10fd | 100hd | 100fd |
1000fd | 100fx | 1000base-x}
Interface Config
flow-control
This command enable/disable
flow-control on ports. flow-control {enable | disable}
Interface Config
port-security
This command add or delete a static
mac into mac security table.
Format port-security
{add|delete}
<
sourcemac >
Mode Interface Config
port-security
lock-mode
This command disable port security or
specify static lock mode.
port-security lock-mode {none |
static}
Interface Config
port-security
lock-mode
dynamic
This command enable limited
dynamic lock mode,and specify
maximin learning entries for limited
dynamic lock mode.the max-entries
value :0~24
port-security lock-mode dynamic
max-entries 24
Interface Config
qos
This command specifies port-based
qos priority mapping.
qos port-based priority <0..7>
Interface Config
1.1)rate-limit egress enable
This command limits egress rate,
which the unit is Kbps.
Format rate-limit egress enable
token bsize <Burst Size
Value>
Mode Interface Config
1.2)rate-limit egress disable
This command disable egress rate limit.
rate-limit
2) rate-limit ingress
This command limits ingress rate,
which the unit is Kbps.
Format rate-limit ingress < rate >
Mode Interface Config
1) Enable/disable storm control.
Format storm-control {enable |
disable}
Mode Interface Config
2) storm-control broadcast
This command storm control for
broadcast only, and limited
value :0,64,256,1024,10240,65536.1
02400,1024000,which the unit is Kbps
and 0 means no limit.
storm-control broadcast < rate >
Interface Config
3) storm-control
broadcast-multicast
This command storm control limited
value :0,64,256,1024,10240,65536.1
02400,1024000,which the unit is Kbps
and 0 means no limit.
storm-control broadcast-multicast
< rate >
Interface Config
storm-control
4) storm-control
broadcast-unknown
This command storm control limited
value :0,64,256,1024,10240,65536.1
02400,1024000,which the unit is Kbps
and 0 means no limit.
Format storm-control
broadcast-unknown
<
rate >
Mode Interface Config
e.g.
Switch(Interface 1)# storm-control
broadcast-unknown 64