MicroNet SP6824P, User Manual

Page: 67 / 80

67
Commands Description Syntax
3.4) access-list name <WORD>
clear packet-type
This command clears packet type
filter.
Format access-list name < WORD >
clear packet-type
Mode Global Config
3.5) access-list name <WORD>
clear mac SA
This command clears a source mac
address.
Format Access-list name < WORD >
clear mac SA
Mode Global Config
3.6) access-list name <WORD>
clear MAC DA
This command clears a destination
mac address
Format Access-list name < WORD >
clear mac DA.
Mode Global Config
3.7) access-list name <WORD>
clear VID
This command clears the 802.1Q
VLAN tag of packet.
Format Access-list name < WORD >
clear VID
Mode Global Config
3.8) access-list name <WORD>
clear ether-type
This command clears ether type filter.
Format access-list name < WORD >
clear ether-type
Mode Global Config
4) access-list name <WORD>
deletes.
This command removes the ACL
entry.
Format access-list name < WORD >
deletes
Mode Global Config
5) access-list name <WORD>
{enable|disable}
This command enables/disables the
ACL entry
Format access-list name < WORD >
{enable|disable}
Mode Global Config
6) access-list name <WORD> set
6.1) access-list name <WORD> set
priority
This command specifies ACL entry
priority.
Format access-list name < WORD > set
priority <0-65535>
Mode Global Config
6.2) access-list name <WORD> set IP-mode
6.2.1) access-list name <WORD>
set IP-mode SRC IP.
This command specifies a source IP
address.
Format access-list name < WORD > set
IP-mode SRC IP <IP-addr>
<
mask-addr >
Mode Global Config
6.2.2) access-list name <WORD>
set IP-mode DST IP
This command specifies a destination
IP address.
Format access-list name < WORD > set
IP-mode DSP IP < IP-addr >
< mask-addr >
Mode Global Config
6.3) access-list name <WORD> set L4port
This command specifies the TCP/UDP port range.
6.3.1) access-list name <WORD>
set l4port SRC-port
This command specifies the source
TCP/UDP port range.
Access-list name < WORD > set L4 port
SRE-port from <1-65535> to <1-65535>
Global Config
6.3.2) access-list name <WORD>
set l4port DST-port
This command specifies the
destination TCP/UDP port range.
access-list name < WORD > set l4port
DST-port from <1-65535> to <1-65535>
Global Config
6 .4) access-list name <WORD> set
IP-mode packet-type
This command specifies the packet
type.
access-list name < WORD > set IP-mode
packet-type
{ICMP|IGMP|IP|TCP|UDP|GRE}
Global Config
6.5) access-list name <WORD> set mac-mode
Specify ACL entry priority.