MicroNet SP6824P, User Manual

Page: 65 / 80

65
Commands Description Syntax
6.6) spanning-tree port
migration-check
This command Re-checks the
appropriate BPDU format to send on
ports.
Format spanning-tree port
migration-check
{enable|disable} ports <port-list>
Mode Global Config
6.7) spanning-tree port root-guard
This command is used to configure
stp root guard
Format spanning-tree port
migration-check
{enable|disable} ports <port-list>
Mode Global Config
7) spanning-tree priority
This command configures RSTP
bridge priority value.
Format spanning-tree priority
<0-61440>
Mode Global Config
8) spanning-tree mst
Configure a multiple spanning tree instance.
8.1) spanning-tree mst instance
This command creates or removes a MST instance
8.1.1) spanning-tree mst instance
add
This command creates a MST
instance.
Format spanning-tree mst instance add
vlan < vlan list > mstpid < MST
ID >
Mode Global Config
e.g. Switch(Config)# Spanning-Tree mst
instance add vlan 2-5 mstpid 2
Switch(Config)# Spanning-Tree mst
instance add vlan 6 mstpid 3
8.1.2) spanning-tree mst instance
delete
This command removes the last MST
instance.
Format spanning-tree mst instance
delete
Mode Global Config
8.2) spanning-tree mst vlan
This command adds or deletes vlan frome a MSTP instance.
8.2.1) spanning-tree mst vlan
<MST ID> <vlan list> add
This command creates a MST
instance.
Format spanning-tree mst vlan < MST
ID > < vlan list > add
Mode Global Config
e.g. Switch(Config)# Spanning-Tree mst
vlan 3 3-5 add
8.2.2) Spanning-Tree mst vlan
<MST ID> <vlan list> delete
This command deletes a vlan from a
MST instance.
Format Spanning-Tree mst vlan < MST
ID > < vlan list > delete
Mode Global Config
8.3) spanning-tree mst bridgepri
This command configures bridge
priority for a MST instance.
Format spanning-tree mst bridgepri
< MST ID > < priority >
Mode Global Config
8.4) spanning-tree mst cost
This command configures port path
cost in a MST instance.
Format spanning-tree mst cost < MST
ID > < path cost > ports < port list >
Mode Global Config
8.5) spanning-tree mst priority
This command configures port priority
in a MST instance
Format spanning-tree mst priority < MST
ID > < priority > ports < port list >
Mode Global Config
User
This command changes user
password. Format user password
Mode Global Config
Interface
This command enters into configure
interface mode. Format Interface < port-ID >
Mode Global Config