MicroNet SP6824P, User Manual

Page: 60 / 80

60
Commands Description Syntax
4.1) network dhcp-relay mode
This command configures dhcp relay
mode.
Format network dhcp-relay mode
{enable|disable}
Mode Global Config
4.2) network dhcp-relay server
This command configures dhcp-relay
server ip-address.
Format network dhcp-relay server
< A.B.C.D >
Mode Global Config
4.3) network dhcp-relay vlan
Configure dhcp-relay option-82 vlan information.
4.3.1) network dhcp-relay vlan
<vlan-ID> add
This command enters a vlan which
will be enable DHCP-relay option82.
Format network dhcp-relay vlan
< vlan-ID > add
Mode Global Config
4.3.2) network dhcp-relay vlan
<vlan-ID> remove
This command enters a vlan which
will be disable dhcp-relay option82.
Format network dhcp-relay vlan
< vlan-ID > remove
Mode Global Config
5) network sysinfo
Configure switch system information.
5.1) Network sysinfo sysname
This command configures system
name.
Format network sysinfo sysname
< WORD >
Mode Global Config
5.2) network sysinfo syslocate
This command configures system
location.
Format network sysinfo syslocate
< WORD >
Mode Global Config
5.3) network sysinfo syscontact
This command configures system
contact information.
Format network sysinfo syscontact
< WORD >
Mode Global Config
6) network admin-timeout
This command configures
web/console admin time out interval.
‘0’ means disable.
Format network admin-timeout
< 0-65535 >
Mode Global Config
1) port-all admin-mode
This command configures ports
admin mode.
Format port-all admin-mode {enable |
disable}
Mode Global Config
2) port-all auto-negotiate
This command configures ports
auto-negotiation mode.
Format port-all auto-negotiate
{enable|disable}
Mode Global Config
3) port-all flow-control
This command configures ports flow
control.
Format port-all flow-control
{enable|disable}
Mode Global Config
4) port-all portsec-lockmode
Configure port security.
4.1) port-all portsec-lockmode
none
This command disable port security
Format port-all portsec-lockmode none
Mode Global Config
4.2) port-all portsec-lockmode
dynamic
This command enable limited
dynamic lock mode.
Format port-all portsec-lockmode
dynamic max-entries <0-24>
Mode Global Config
5) port-all rate-limit
Configure rate limit value on all ports.
5.1) port-all rate-limit egress
This command specifies egress rate
limit.
Format port-all Rate-Limit egress
<value>
Mode Global Config
port-all
5.2) port-all rate-limit ingress
This command specifies ingress rate
limit.
Format port-all rate-limit ingress
<value>
Mode Global Config