MicroNet SP6824P, User Manual

Page: 56 / 80

56
Commands Description Syntax
27.4.3)show dhcpsnooping
database dynamic
This command is used to show all
dhcpsnooping dynamic entries
Format show show
dhcpsnooping database
dynamic
Mode Privileged Mode
28)show ipsrcgd
This command is used to displays the cofig,ports and database of the IP
source Guard.
28.1)show ipsrcgd config
This command is used to displays the
configuration of IP Source Guard.
Format show ipsrcgd config
Mode Privileged Mode
28.2)show ipsrcgd ports
This command is used to displays ports
which enabled IP Source Guard
Format show ipsrcgd ports
Mode Privileged Mode
28.3)show ipsrcgd database
This command is used to displays the
database of IP Source Guard.
Format show ipsrcgd database
Mode Privileged Mode
29)show https
This command is used to displays https
information.
Format show https
Mode Privileged Mode
30)show loop_detect
This command is used to displays
selfloop detect information
Format show loop_detect
Mode Privileged Mode
telnet
This command is used to telnet the
other host. Format telnet < A.B.C.D >
Mode Privileged Mode
3.4 Global Config mode commands
Commands Description Syntax
exit
This command is used to exit current
shell Format exit
Mode Global Config
This command is used to configure vlan
1) vlan add
This command is used to create a new vlan or some vlans
1.1) vlan add number
This command enter a vlan ID
Format vlan add number < vlan-ID >
Mode Global Config
1.2) vlan add range
This command enter a range of vlan
ID
Format vlan add range from < vlan-ID >
to < vlan-ID >
Mode Global Config
2) vlan delete
This command remove a existed vlan
Format vlan delete < vlan-ID >
Mode Global Config
3) vlan port
This command is used to configure 802.1Q port parameters for vlans
3.1) vlan port all
This command is used to configure all ports
3.1.1) vlan port all port-configure
This command is used to configure
ports in a specific vlan
Format vlan port all port configure
< vlan-ID >
Mode Global Config
3.1.2) vlan port all protected
This command is used to configure
protected ports
Format vlan port all protected
{enable|disable}
Mode Global Config
vlan
3.1.3) vlan port all pvid
This command is used to configure
port pvid
Format vlan port all pvid < vlan-ID >
Mode Global Config