MicroNet SP6824P, User Manual

Page: 66 / 80

66
Commands Description Syntax
This command is used to configure
RMON.
1) rmon event
This command creates rmon event
entry.
Format rmon event index < 1..65535 >
desc < WORD > event < 1..4 >
community
<
WORD >owner< WORD >
Mode Global Config
e.g. Switch(Config)# rmon event index 1
desc 123 event 4 community 123 owner
test
2) rmon alarm
This command creates rmon alarm
entry.
e.g.
Switch(Config)# RMON alarm index 1
interval 10 interface counter 1
sample delta start all rthreshold 100
fthreshold 10 reindex 1 feindex 0
owner test
Format rmon alarm index < 1..65535 >
interval <0..3600> interface
<port number> counter <1..17>
sample{absolute|delta}start{rasi
ng|falling|all}rthreshold<0..6553
5>fthreshold<
0..65535 > reindex
< 0..65535 > feindex < 0..65535 >
owner< WORD >
Mode Global Config
3) rmon del
3.1) rmon del event
This command deletes rmon event
entry.
Format rmon del event index<
1..65535 >
Mode Global Config
rmon
3.2) rmon del alarm
This command deletes rmon alarm
entry.
Format rmon del alarm index<
1..65535 >
Mode Global Config
1) access-list name <WORD> add
This command creates a new
access-list.
Format access-list name < WORD >
add priority <1-65535>
Mode Global Config
2) access-list name <WORD> action
2.1) access-list name <WORD>
action deny
This command denies an ACL entry.
Format access-list name < WORD >
action deny
Mode Global Config
2.2) access-list name <WORD>
action permit
This command permits an ACL entry
and queue 1-4 will assign priority
queue when rule activated.
Format access-list name < WORD >
action permit {<cr>|queue
<1-4>}
Mode Global Config
3) access-list name <WORD> clear
This command clears ACL entry contents.
3.1) access-list name <WORD>
clears SRC IP
This command clears the source
IP/subnet mask filter.
Format access-list name < WORD >
clear SRC IP
Mode Global Config
3.2) access-list name <WORD>
clears DST IP
This command clears the destination
IP/subnet mask filter.
Format access-list name < WORD >
clear DST IP
Mode Global Config
3.3) access-list name <WORD> clear L4port
3.3.1) access-list name <WORD>
clear L4port SRC port
This command clears TCP/UDP
source port filter.
Format access-list name < WORD >
clear l4port SRC port
Mode Global Config
access list
3.3.2) access-list name <WORD>
clear l4port DST port
This command clears TCP/UDP
destination port filter.
Format access-list name < WORD >
clear l4port DST port
Mode Global Config