62
upload to FTP during the trigger active until the tampering stops. Set
the Image frequency as the upload frame rate. The setting range is
from 1 frame to 15 frames.
NOTE:
Make sure FTP configuration has been completed.
Refer to
FTP
for further details.
Upload Image by E-Mail
Select this item and the administrator can assign an E-mail address
and configure various parameters. When tampering is detected,
event images will be sent to the appointed E-mail address.
<Pre-trigger buffer> function allows users to check what happened
to cause the trigger. The <Pre-trigger buffer> frame rate could be
pre-determined. On the other hand, <Post-trigger buffer> is for users
to upload certain amount of images after tampering occurs.
NOTE:
Normally the setting range of the <Pre-trigger buffer>
is 1 to 20. However, the setting range will change accordingly
if the frame rate of MJPEG on the <Video Frame Rate>
setting page is 6 or smaller.
Check the box <Continue image upload> to upload the triggered
images during certain time or keep uploading until the trigger is off.
Select <Upload for __ sec> and enter the duration in the blank. The
images of the duration will be uploading by E-mail when tampering is
triggered. The setting range is from 1 to 9999 seconds. Select
<Upload during the trigger active> to make the images keep being
upload to E-mail during the trigger active until tampering stops. Set
the Image frequency as the upload frame rate. The setting range is
from 1 frame to 20 frames.
NOTE:
Make sure SMTP configuration has been completed.
Refer to
for further details.
Send HTTP notification
Check this item, select the destination HTTP address, and specify
the parameters for HTTP notifications. When the Tampering Alarm is
triggered, the HTTP notifications can be sent to the specified HTTP
server.
For instance, if the custom parameter is set as”
action=1&group=2
”,
and the HTTP server name is”
http://192.168.0.1/admin.php
”, the
notification will be sent to HTTP server as”
http://192.168.0.1/admin.php? action=1&group=2
” when alarm is
triggered.
Summary of Contents for SP5563A
