15
counter-/clockwise.
180 Degree Rotate
Select <180 Degree> to rotate the image by 180°. Click on <Save> to
confirm the setting.
GOV Settings
Users can set the GOV length to determine the frame structure (I-frames and
P-frames) in a video stream for saving bandwidth. Less bandwidth is needed if
the GOV length is set to a high value. However, the shorter the GOV length
the better the video quality is. The setting range is from 2 to 64. The default
value for H.264-1 / H.264-2 / H.264-3 / H.264-4 is 60 / 60 / 30 / 30 (NTSC) or
50 / 50 /25 / 25 (PAL). Click on <Save> to confirm the GOV setting.
H.264 Profile
Users can set each H.264 Profile to <Baseline Profile>, <Main Profile> or <High
Profile> according to its compression needs. With the same bit rate, the higher
the compression ratio, the better the image quality is. The default setting is
<Main Profile>.
NOTE:
Please make sure the higher compression ratio is supported by
system before setup.
Click on <Save> to confirm the setting.
7.4.2
Video Compression
Users can specify the values for MJPEG/ H.264 compression in the video
Compression page (see the figure below), depending on the application.
Summary of Contents for SP5563A
