59
7.3.8.3
Network Failure Detection
Network Failure Detection allows the IP Camera to ping another IP device
(e.g. NVR, VSS, Video Server, etc.) within the network periodically and
generates some actions in case of network failure occurs, for instance, a
Video Server is somehow disconnected.
Being capable of implementing local recording (through microSD card) when
network failure happens, the IP Camera could be a backup recording device
for the surveillance system.
Detection Switch
The default setting for the Detection Switch function is <Off>. Enable the
function by selecting <On>
.
Users can also activate the function according
to the schedule time that is previously set in the <Schedule> setting page.
Select <By schedule> and click <Please select…> to choose the desired
schedule from the drop-down menu.
Detection Type
Input the IP device address and the period of ping time to ping. The ping
time setting range is from 1 to 99 minutes.
Triggered Action (Multi-option)
The administrator can specify alarm actions that will take when network
failure is detected. All options are listed as follows.
Enable Alarm Output
Select the item to enable alarm relay output.
Record Video Clip
Select the item and the alarm-triggered recording will be saved into
the microSD card.
Pre-trigger buffer recording function allows users to check what
happened to cause the trigger. The pre-trigger buffer time range is
from 1 to 3 seconds. Select <Upload for __ sec> to set the recording
duration after alarm is triggered. The setting range is from 1 to 99999
seconds. Select <Upload during the trigger active> to record the
triggered video until the trigger is off.
Summary of Contents for SP5563A
