37
There are up to 256 preset points that can be set in the Preset setup page.
Please follow the steps below to set and run preset points.
Preset Points Setup
Step 1.
Move the camera to the desired position by moving the mouse cursor
onto the screen, one left click on mouse, and then dragging the red
arrow to pan/tilt. Users may adjust the zoom position as well.
Step 2.
Once a Preset Point is defined, please assign a number (between 1
and 256) and enter it into the input field.
Step 3.
Click on the < √ > button to save the defined preset point.
Preset Run
Type the Preset Point number into the Preset field, click on the
button,
and the camera will turn to the appointed point.
7.6.2
Sequence
The Sequence setting can be found under this path:
Pan Tilt> Sequence
.
Summary of Contents for SP5563A
