66
The administrator can specify the triggered actions that will take when the
users switched the Manual Trigger button to ON. All options are listed as
follows.
Manual Trigger
The default setting for the Manual Trigger function is <Off>. Enable the
function by selecting <On>. After the Manual Trigger function is enabled,
click the Manual Trigger button on the Home page to start uploading data.
Click again to stop uploading.
Triggered Action (Multi-option)
The administrator can specify alarm actions that will take at an alarm
occurrence. All options are listed as follows.
Enable Alarm Output 1/2
Select these items to enable alarm relay
outputs.
Send Message by FTP/E-Mail
The administrator can select whether to send an alarm message by
FTP and/or E-mail when an alarm is triggered.
Upload Image by FTP
Select this item and the administrator can assign
an FTP site
and configure various parameters. When the alarm is triggered,
event images will be uploaded to the appointed FTP site.
<Pre-trigger buffer> function allows users to check what happened
to cause the trigger. The <Pre-trigger buffer> frame rate could be
pre-determined. On the other hand, <Post-trigger buffer> is for
users to upload certain amount of images after the alarm input is
triggered.
Summary of Contents for SP5563A
