Microlife NC 200, Manual

Page: 4 / 25

4

This device may only be used for the purposes described in
these instructions. The manufacturer cannot be held liable for
damage caused by incorrect application.
 Never immerse this device in water or other liquids. For
cleaning please follow the instructions in the «Cleaning
and Disinfecting» section.

Do not use this device if you think it is damaged or notice
anything unusual.
 Never open this device.

A basic physiological effect called vasoconstriction can occur in
the early stages of fever, resulting in a cool skin effect. The
recorded temperature using this thermometer can, therefore,
be unusually low.
 If the measurement result is not consistent with the patient's finding
or unusually low, repeat the measurement every 15 minutes or
double check the result by another core body temperature
measurement.

This device comprises sensitive components and must be
treated with caution. Observe the storage and operating condi-
tions described in the «Technical Specifications» section.

Ensure that children do not use this device unsupervised; some
parts are small enough to be swallowed.

Do not use this device close to strong electromagnetic fields such
as mobile telephones or radio installations. Keep a minimum
distance of 3.3 m from such devices when using this device.

Protect it from:
- extreme temperatures
- impact and dropping
- contamination and dust
- direct sunlight
- heat and cold

If the device is not going to be used for a prolonged period the
batteries should be removed.

WARNING: The measurement results given by this device
is not a diagnosis. It is not replacing the need for the consul-
tation of a physician, especially if not matching the patient’s
symptoms. Do not rely on the measurement result only,
always consider other potentially occurring symptoms and
the patient’s feedback. Calling a doctor or an ambulance is
advised if needed.
3. How this Thermometer measures Temperature
This thermometer measures infrared energy radiated from the
forehead as well as objects. This energy is collected through the
lens and converted to a temperature value.
4. Control Displays and Symbols

All segments displayed
9
: Press the START/IO button
7
to
turn on the unit; all segments will be shown for 1 second.

Ready for measuring
AT
: When the unit is ready for measuring,
the « °C » or « °F » icon will keep flashing while the mode icon
(body or object) will be displayed.

Measuring countdown
BR
: A 3 second countdown will be
shown on the display (3, 2, 1), before each measurement.

Measurement complete
AK
: The reading will be shown on the
display
4
with the « °C » or « °F » icon and the mode icon
steady. The unit is ready for the next measurement as soon as
the « °C » or « °F » icon is flashing again.

Low battery indicator
AN
: When the unit is turned on, the
«battery» icon will keep flashing to remind the user to replace the
batteries.
5. Setting Date, Time and Beeper Functions
Setting the date and time
1. After the new batteries are fitted, the year number flashes in the
display
BO
. You can set the year by pressing the M-button
5
.
To confirm and then set the month, press the MODE button
6
.
2. Press the M-button
5
to set the month. Press the MODE
button
6
to confirm and then set the day.
3. Follow the previously mentioned instructions to set the day,
hours and minutes.
4. Once you have set the minutes and pressed the START/IO
button
7
, the date and time are set and the time is displayed.

If no button is pressed for 20 seconds, the device automat-
ically switches to ready for measuring
AT
.

Cancel time setup: Press the START/IO button
7
during
time setup. The LCD will show Date/Time icons with «--:--».
After that press the START/IO button
7
to start the
measurement. If no further action is taken within 30
seconds, the device will automatically turn off.

Change current date and time: Press and hold the MODE
button
6
for approx. 8 seconds until the year number