System Configuration
93
•
The system blocks a disk saving when the disk is broken physically and shows the damage of the disk by picture. This
status is only shown on the system starting. And any tasks for the disk cannot be done. The disk with this status should
be changed.
Network Interface
The system can be monitored remotely by configuring the interface when the system is connected to the network.
Figure 5.10. Network Interface Configuration Screen
Name
This item is a network interface of the system and displayed in the list depending on the number of the network interface
card. Three interfaces from one to three will be displayed when there’s three network interface card.
Address & DNS
Connection method and address are configured.
•
Connection Method
•
Each interface has two connection types as follows.
•
Automatic (DHCP)
•
Network interface configures the system address automatically from the DHCP(Dynamic Host Configuration
Protocol) server connected with NVR via the network.
•
Manual (Static)
•
The devices on the network are assigned with a static address usually.
