Microcom 334M, Operator'S Manual

Page: 27 / 237

Getting Started Chapter 3
3-9 334M Operator’s Manual - 880060-0110
3.3.2.1 HTTP Web Configuration – Microcom Ethernet Option
Follow these instructions to use the HTTP Web interface to configure the Microcom Ethernet
Option board.
Open and internet browser, preferably Chrome or Firefox.
Enter one of the following parameters into the browser address bar:
Host name: MICROCOM
Default IP Address: 192.168.200.3
OR
The browser should initially ask for a username and password; both of which default to ‘mic’.
Once signed in, you will be directed to the configuration page of the application:
NOTE: If using the Host name (Microcom) to change the IP Address, you must close the
browser and repair the network. To do this, go into Network Connections, click on the Local
Test Network, click on the Support tab, and then click the Repair button. A browser can
now be opened and accessed by using the host name once again.