Microcom 334M, Operator'S Manual

Page: 227 / 237

334M Operator’s Manual - 880060-0110 13-15
^A ^D COMMAND
XX 123 Set TOF Retract Distance: Sets the distance that the printer will retract when
performing a TOF operation. The retraction distance range is from 1 to 900
with the units being in dots or pixels.
XX 124 Stock Out Threshold: Sets the stock out threshold
xxyy 127 Save FONTS to RAM: This command is used to load or save fonts to the
volatile RAM memory. Refer to Chapter 7 for more detail.
X 129 Auto Set Threshold: This command automatically determines and sets the
nonvolatile threshold for proper registration.
0 Automatically sets the transmissive threshold value.
1 Automatically sets the reflective threshold value.
XX 130 Save a FORMAT to FLASH: This command is used to save an LDS format
to non-volatile flash memory. The ^A value is used to indicate the memory
slot location into which the format will be saved. Formats are saved in a
separate area of flash than the fonts and graphics so the memory slots for the
formats are independent from the fonts and graphic memory slots. The valid
range of memory slots is from 1 to 128.
XX
131 Delete a FORMAT from FLASH: Used to delete a format that has been
stored in flash memory. The ^A value is used to specify the memory slot of
the stored format that will be deleted.
xxyy 133 Save Compressed GRAPHICS to FLASH: This command is used to save
graphic’s into non-volatile flash memory. The ^Axxyy^D133 command is
placed at the beginning of a graphic download and instructs the printer to save
the following data as a graphic file. The <ESC> (^[ or 0x1B) instructs the
printer the end of file download and acts as the command terminator.
xx The number of additional 64KB sectors needed to save the graphic file.
yy The memory slot location of the graphic being saved; CGN # (1-255)
XX 134 Delete a GRAPHIC from FLASH: Instructs the to delete a graphics from flash
memory. Issuing a “0” for the ^A value causing the printer to delete all flash
graphics. The ^A value is used to select the memory slot or CGN # that will be
deleted. The valid values for Axx are 0 to 255.
xxyy 135
Save FONTS to FLASH: This command is used to save font’s into the
printer’s non-volatile flash memory. The ^Axxyy^D135 command is placed at
the beginning of a font file download and instructs the printer to save the
following data as a font file. The <ESC> (^[ or 0x1B) instructs the printer the
end of file download and acts as the command terminator.
xx The number of additional 64KB sectors needed to save the graphic file.
yy The memory slot location of the graphic being saved; CGN # (1-255)