manualshive.com logo in svg

MICRO-EPSILON colorSENSOR CFO Series, Instruction Manual

Share
Download
MICRO-EPSILON colorSENSOR CFO Series Instruction Manual Download Page 79

Page 79

Operation

colorSENSOR CFO

5.7.5.7 

Extras

  Go to the menu 

Settings > Extras

.

Fig. 33 Screen shot, Extras

Reboot

The sensor is switched off and then back on.
After a firmware update, the computer restarts automatically.

Factory defaults

The sensor is reset to the factory default settings and the color table is deleted. For 
factory defaults, see Chap. 

A 2

.

i

  After rebooting the controller is assigned a fixed IP; it may be necessary to 

reestablish communication with the web interface.

Update firmware

This function allows you to load a selected firmware file for updating.

The firmware update may take up to 15 minutes. The web interface does not display a progress message 
during the update. Do not disconnect the colorSENSOR from the power supply or the PC during the update! 

 

> Destruction of sensor

NOTICE

Summary of Contents for colorSENSOR CFO Series





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands