manualshive.com logo in svg

MICRO-EPSILON colorSENSOR CFO Series, Instruction Manual

Share
Download
MICRO-EPSILON colorSENSOR CFO Series Instruction Manual Download Page 104

Page 104

Anhang | API Communication with Controller (Version 0.7.1)

colorSENSOR CFO

A 3.5.3.9  /api/firmware/recovery/upgrade-from-current

Saving currently used firmware image as recovery image. This function is useful for updating an older  
recovery image to the latest (currently installed) status.
The factory image contains only the firmware. Currently valid settings are not included.

POST

No attributes are expected 
Error codes:

LPLC.system.action_failed

A 3.5.3.10 /api/firmware/settings

GET

The following attributes are provided:

Attribute

Model

Content

release_channel

Text

Type of publication

A 3.5.3.11 /api/firmware/status

GET

The following attributes are provided:

Attribute

Model

Content

source_url

Text

Address of firmware source

build_id

Text

Build Version

version

Text

Current version

A 3.5.3.12 /api/network

Network configuration of sensor

DELETE

Reset sensor network settings to delivery state

Summary of Contents for colorSENSOR CFO Series





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands