MICRO-EPSILON colorSENSOR CFO Series, Instruction Manual

Page: 106 / 124

Page 106
Anhang | API Communication with Controller (Version 0.7.1)
colorSENSOR CFO
PUT
New contents can be set for the address configurations lists in the dictionary keys ipv4 and ipv6.
All previous address configurations for this address family are replaced by the new list. Only the address
families contained in the data configurations for the data sets are changed - all address families not men-
tioned remain unchanged. Transfer of an empty list removes the address configurations present for this
address family.
Examples:
Delete IPv6 configurations:
{“ipv6”: {“address_configurations”: []}}
Replace IPv4 configurations with DHCP:
{“ipv4”: {“address_configurations”: [{“method”:
“dhcp”}]}
}
Set static and dynamic IPv4 configuration:
{“ipv4”: {“address_configurations”: [{“method”:
“dhcp”}, {“method”: “static”, “address”: “192.168.0.100/24”}]}}
i
The address_configurations field is laid out as a list. However, presently (as of August 2017) only the use
of one signal configuration is supported by the API backend. API clients should therefore initially set only
one address configuration per family (
IPv4
/
IPv6
).
Error codes:
LPLC.not_found.collection.item
LPLC.validation
A 3.5.3.15 /api/peripherals/emitters
Collection of light sources for current profile
GET
The profile_id filter allows selection of a recognition profile. The standard value is current.