MICRO-EPSILON colorSENSOR CFO Series, Instruction Manual

Page: 21 / 124

Page 21
Assembly
colorSENSOR CFO
The three switching outputs are switchable push-pull outputs. The switching output logic level depends on the
operating vUB connected.
Use: Direct for 3 individual colors or binary for 7 color groups
The switching state
zero
is not used to ensure reliable test performance in the face of a discontinuity.
The switching state all switched is recommended as the standard error output.
Use shielded cable with a length < 30 m.
i
Micro-Epsilon recommends use of CAB-M12-8P-Bu-ge cable, available as an option, see Chap. A 1 .
4.4.2 Ethernet (ETH)
For data transmission connection to an RJ45 Ethernet connector
- 4-pin Female connector
- with Ethernet network (PC)
Connect the sensor to the network using a shielded Ethernet cable (Cat5E) with a length < 100 m. Micro-
Epsilon recommends use of the optionally available cable CAB-M12-4P-St-ge ... RJ45-Eth, see Chap. A 1 .
Pin Color
1
Function Description
2
View of sensor
flange socket
1 4
3
2
Pin sequence, 4-pin
Cable connector,
view of solder side
1 Orange/
white TX+ Ethernet
2 Blue/
white RX+ Ethernet
3 Orange TX- Ethernet
4 Blue RX- Ethernet
Fig. 8 ETH Ethernet socket
The sensor can be configured using the HTTP-API commands, see Chap. A 3 .
1) Conductor color CAB-M12-4P-St-ge ... RJ45-Eth
2) Specification pursuant to 100BASE-TX