MICRO-EPSILON colorSENSOR CFO Series, Instruction Manual

Page: 102 / 124

Page 102
Anhang | API Communication with Controller (Version 0.7.1)
colorSENSOR CFO
In the event of an error, the Status Code 400 (Bad Request) is returned as early as possible after recognition
of a permanent error status.
Error codes:
LPLC.format.malformed.upload
A 3.5.3.6 api/firmware/images/UUID
GET
Requests for information on a partially or completely transferred firmware image
The content of the
status
field is to be interpreted as follows:
incomplete : Number of bytes uploaded does not yet equal number of bytes predicted.
complete
: Image has been uploaded completely and can be used.
invalid_signature
: Erroneous check sum detected while uploading image.
processing_failure
: Internal (undefined) error occurred while processing upload.
malformed_content : Uploaded image does not corresponded to expectations (e.g. erroneous check
sums).
device_mismatch
: Uploaded image does not contain any data to match sensor. The image was
probably intended for a different sensor (with a different sensor ID).
Error codes:
LPLC.not_found.collection.item