MICRO-EPSILON colorSENSOR CFO Series, Instruction Manual

Page: 49 / 124

Page 49
Operation
colorSENSOR CFO
5.4.5.1 IN0 Switching Input Function Assignment
Using the keyboard it is possible to assign switching input IN0 to GATE for triggered color evaluation or to
TEACH
for triggered color teaching.
INT
OPT
ESC
TOL
CLR
TEACH
AUTO
1
2
3
4
5
6
7
8
OPTIONS OUT / LE
VEL
GATE
TEACH
HOLD
MULTI
CLASSIFY
CYLINDER
SPHERE
BOX
i
If neither of the two functions is selected, the LEDs flash slowly
(100/1900 ms). As soon as a function is selected, the set function flashes
rapidly (1900/100 ms).
GATE
Triggered
color evaluation
When the gate is active, the sensor switching outputs are evaluated and up-
dated only when the configured voltage is currently present at the trigger input.
TEACH - Triggered color
teach
Triggered teach can be used to make run time changes to the color table with-
out direct human intervention.
INT
OPT
ESC
TOL
CLR
TEACH
AUTO
1
2
3
4
5
6
7
8
OPTIONS OUT / LE
VEL
GATE
TEACH
HOLD
MULTI
CLASSIFY
CYLINDER
SPHERE
BOX
Press the
TEACH
key for less than 2 sec. to switch triggered color evaluation
on and off via IN0.
GATE
flashes slowly to indicate that triggered color evaluation is switched off.
GATE
flashes rapidly to signal that triggered color evaluation is switched on via
IN0.