KSZ884x-PMQL Evaluation Board User’s Guide
Micrel, Inc.
May, 2006
Rev.
1.1
17/27
7 KSZ884X-PMQL-Eval Board Demonstration
7.1 The Platform on PC
7.1.1
Prepared before Installation
Create a folder on the PC and download the Windows drivers into the folder, or copy the
Windows drivers into a floppy disk. First, unpack the KS884X_windows.zip file in the software
folder on the CD which is with the evaluation board kit. There will appear three subdirectory
(Driver, PCI, ISA) after unpack the zip file. The Driver subdirectory contains the Window driver
files for the KSZ8841-PMQL–Eval board and KSZ8842-PMQL-Eval board.
7.1.2
Installation the Evaluation Card
First of all, open the case of the PC and check the PCI slot to see it supports 5V or 3.3V power, if
the PCI slot support 5V, then close pin 2 and pin 3 of the JP12 on the board. If the PCI slot
supports 3.3V, then close pin 1 and pin 2 of the JP12 on the board. Make sure the configuration
is correct on the demo board. After that to plug the KS884X-PMQL-Eval board into the PCI slot
on the PC and power on the computer. Upon detection of new PCI hardware, Window will prompt
to install a driver as shown in Figure 6.
Figure 6: Window Prompts to Install New Hardware Driver
Clicking Next button on this window, The Window will display as shown in Figure 7.
Figure 7: Window prompts to Locate Driver Files
