MICOM-3F/3T/3R HF-SSB Owner’s Guide
22
Note
To access the priority channel (available in the Scan mode, that is, when ALE is
disabled, provided it has been preprogrammed by the RSS or MRC), press
ESC
momentarily.
2. To use the displayed channel, press
ENTER
.
MICOM-3
CH 1
BACK
CLR
or
Select a channel by pressing the
UP
/
DOWN
keys until you
reach the required channel.
or
Use the keypad to enter the desired channel number.
The channel number blinks, indicating that the selection has not yet been confirmed.
Note
If you enter a channel that is not yet programmed, a
NOT PROG message appears. To program a new
channel, see Programming Channels on page 82, or use
the RSS or MRC software.
MICOM-3
CH 31
NOT PROG
3. When the desired channel is displayed, press
ENTER
to confirm your choice.
Example
: To choose channel 12:
Step 1 Enter Channel mode (if not in already).
Step 2 Press the digits “1” and “2” on the keypad. The
number 12 blinks in the LCD display.
Step 3 Press
ENTER
to confirm your choice.
1
?
@
/
G
P
H
R
I
S
4
7
*
Q
J
M
K
N
L
O
5
6
T
U
V
8
9
A
D
B
E
C
F
2
3
0
#
Y
W
Z
X
MENU
Esc
P
GPS
ALARM
12
Using the Frequency Mode
Frequency mode is used to receive and transmit on a specific frequency. You can select the
frequency type, change the frequency being used, and operate a variety of functions and options to
assist transmission and reception. You can also store the frequency in a channel of your choice.
There are four frequency types;
•
SMPX
(Simplex Frequency): the same frequency is used for both transmission and reception.
•
DPLX
(Duplex Frequency): transmits on one frequency and receives on a different frequency.
•
RXO
(Receiving Only Frequency): defines a frequency for reception only. You cannot transmit on
that frequency.
•
TXO
(Transmitting Only Frequency): defines a frequency for transmission only. You cannot
receive on that frequency.
