Using Automatic Link Establishment (ALE)
75
3. To select a different address, use the
UP
/
DOWN
keys to scroll to the required address in
the directory, and then press
ENTER
to confirm your selection.
or
If the station you want to add to the group is not in the
directory:
•
Enter the new station using the keypad. If you make a
mistake, scroll to the desired position using
<--
(F2)
and/or
-->
(F3), or clear (
CLR
(F4)) the whole entry and
start again.
MICOM-3
SAVE
<--
-->
CLR
BIDR
BU_
•
When ready, press
SAVE
(F1) to store the new station in
the directory.
MICOM-3
SEND
PAGE
CHAN
DIR
BUD
I
4. Press
PAGE
(F2) if you wish to attach a message to the bidirectional handshake process.
After confirming the message, exclamation mark precedes the name of the called station,
indicating that a message has been attached.
5. Press
CHAN
(F3) if you wish to execute a bidirectional handshake process on a specific
channel.
6. Press
SEND
(F1) or
ENTER
in order to initiate the bidirectional handshake process. During
this process, you will see
TO
alternating with the number of the channel on which the
set up request is being sent.
Note
During the bidirectional handshake process, you can press
STOP
(F1) or
ESC
to
abort the entire process.
➤
To execute a bidirectional handshake with a net:
1. Press
LQA
(F2) to enter the LQA menu.
MICOM-3
BIDR
SOND
LQA
2. Press
BIDR
(F1).
The last called address is displayed. If this is the net you want,
skip directly to Step 8 below.
MICOM-3
SEND
PAGE
CHAN
BIDR
1001
I
3. Press
MORE
.
MICOM-3
MULT
BDIR
1001
I
