MICOM-3F/3T/3R HF-SSB Owner’s Guide
48
Link State
After the radio successfully receives or transmits a call, it is in the link state.
If the call was received from another radio, the display includes the word
FROM
in the first line, as well as the name of the station which initiated
the call (if a message has been received, it is also displayed).
MICOM-3
LQA
MON
FROM
ABC
If the call was initiated by your radio, the display includes the word
LINK
in the first line, as well as the destination address.
MICOM-3
PAGE
MON
LINK
1234
I
Link State Options
While in the link state, you can operate the following functions using the function keys.
Note
The change of link options is temporary. When you exit the link state, all the
changed parameters will be lost.
➤
To select link mode options:
<->
(F1) activates the View mode, where you can view the entire
station address (when over 11 characters), as well as received
messages, if any (when over 11 characters).
MICOM-3
LQA
<-->
MON
FROM
!ABC:PACK A
PAGE
(F2) enables you to select a message to be sent to the station
you are linked to.
MICOM-3
SEND
PAGE
CHAN
CALL
1009
After a message is selected, you can edit it.
MICOM-3
SEND
EDIT
CHAN
<->
AMD11
11 AMD MESS
Note
The
PAGE
function is not available when receiving an AllCall.
LQA
(F3) displays the channel on which the link was established,
and the LQA score of the current link.
MICOM-3
SEND
PAGE
BEST
CALL
CH 3 30%
