MICOM-3F/3T/3R HF-SSB Owner’s Guide
30
Using the Scan Mode
Note
The Scan mode is available only when ALE is turned off using
MENU
>
PROG
>
RAD
>
OPT
>
ALE
.
In the Scan mode, MICOM-3 scans preprogrammed channels. The channels used in the Scan mode
are organized in groups. Up to five scan groups, identified as A to E, may be created using the RSS or
MRC, each containing up to 200 channels.
When a guard channel is selected, it is monitored after every other scanned channel.
➤
To enter the Scan mode:
1. Press
MENU
to display the Menu screen.
MICOM-3
CHAN
FREQ
SCAN
BIT
MENU
I
2. Press
SCAN
(F3).
The last used group flashes in the display.
Note
You can use the Scan function only after at least one group has been downloaded
by means of the RSS or MRC. If no scan group is stored in the radio, after selecting
Scan you will see NO GROUPS, and then the display skips to the PROG menu.
3. If you want to use the currently displayed scan group, press
ENTER
.
or
Press the function key next to the group you want to choose and press
ENTER
to confirm
your choice.
Notes
•
In the Scan mode, one of the five groups is always selected, and the other
groups (up to four) are displayed next to the function keys.
•
If the selected group is not yet programmed, the message GRP X EMPTY
appears in the display, where X is the selected group.
