Micom Autodoor EDM NII Series, Operation Manual, Page: 21 / 23

6-2 Description of signals of I/O board
Board
Address
Signal name Symbol Description
4
Opening brake LOB Limit switch to designate the position to retard opening
Closing brake LCB Limit switch to designate the position to retard closing
Half-opening brake LHO Limit switch to designate the position to retard half-opening
Closing stop LCS Limit switch to designate the position to stop closing
LS mode SPC Enable Limit switch mode oparation
Emergency Open EO Open for 15 seconds at a low speed
Open A (Output) OA
Make relay contact at full open position. OE SIGNAL RELAY
A
Open B (Output) OB
Break relay contact at full open position. OE SIGNAL RELAY
B
Close A (Output) CA
Make relay contact at full closed position. CE SIGNAL RELAY
B
Close B (Output) CB
Break relay contact at full closed position. CE SIGNAL RELAY
B
5
Push Button for Opening PBO Open and hold open until the other push button is depressed
Push Button for Closeing. PBC Close
Push Button for Stop. PBS Stop and stay until the other push button is depressed.
Push Button for Half opeining. PBH Partial open and stay at the designated position.
InterLock IL Enable opening in the interlock mode.
Priority PR Designate the priority door in the interlock mode.
Open A (Output) OA
Make relay contact at full open position. OE SIGNAL RELAY
A
Open B (Output) OB
Break relay contact at full open position. OE SIGNAL RELAY
B
Close A (Output) CA
Make relay contact at full closed position. CE SIGNAL RELAY
B
Close B (Output) CB
Break relay contact at full closed position. CE SIGNAL RELAY
B
6
Panic Switch PS Emergency operation / Panic Open or Close
Ratchet Switch RS Hold-open/Close switchable
Half-open Ratchet switch HRS Partial open and hold open until next signal.
Outer Sensor Enable OSE Enable the outer sensor in the security mode.
Ratchet Switch 1 RS1 Open/Close/Stop in the middle of opening switchable
Open A (Output) OA
Make relay contact at full open position. OE SIGNAL RELAY
A
Open B (Output) OB
Break relay contact at full open position. OE SIGNAL RELAY
B
Close A (Output) CA
Make relay contact at full closed position. CE SIGNAL RELAY
B
Close B (Output) CB
Break relay contact at full closed position. CE SIGNAL RELAY
B
7
(Default)
Panic Switch PS Emergency operation / Panic Open or Close
Ratchet Switch RS Partial open and hold open until next activation signal.
Half-open Switch HS Partial open
Emergency stop Switch ES Emergency Stop
Anzen Switch AS Side Safety Screen
Ratchet Switch 1 RS1 Open/Close/Stop in the middle of opening switchable
Open A (Output) OA
Make relay contact at full open position. OE SIGNAL RELAY
A