MHM SYNCHROPRINT 5000, Operating Instructions Manual

Page: 43 / 52

Operating Instructions Synchroprint 5000
Operating instructions SP5000 V1-0.docx Page 43 of 52
9.8.1. Adjust
Use “Adjust” for machine setup, cleaning and adjustment. Turning the SELECT knob alternates
between different displays. The following displays are possible:
Display 1:

F1 Moves the tables to the clean/half index position.

F2 Indexes/moves the tables to the next print station on the left.

F3 Indexes/moves the tables to the next print station on the right.

F4 Allows the operator to lock or release the pallets.

F5 Moves all squeegees to the outer position.

F6 Moves all squeegees to the inner position.
Display 2:

F2 Defines the direction of movement.

F3 Selects the used pallet size. Table drive parameters will be adapted automatically for
highest possible production capacity. A wrong adjustment can cause disturbances or reduced
production capacity. Possible pallet sizes are
S mall (50x70cm), M edium (70x100cm) and
L arge (80x110xm).

F4 Warming up the pallets to working temperature. For this only active drying stations
are used. Warming up is necessary to get the same print results from the beginning.

F5 Not available at Synchroprint

F6 Parameter for index speed. Input in percentage of maximum index speed. Value can
be changed in 5% steps from 50% to 100%.