Operating Instructions Synchroprint 5000
Operating instructions SP5000 V1-0.docx
Page 23 of 52
The following functions are available from the control keypad:
Key
Function
Pressing and holding “ADJUST” on the keypad (approx. 3 sec.)
puts the machine in the ADJUST-mode.
Pressing CLEAN initiates a “half-index” of the tables,
particularly useful for cleaning the screens. In clean position it
is possible to move the tables manually. Pressing CLEAN again
moves the tables back to its original position even when tables
were moved manually.
+
Pressing the “ADJUST” and the “INDEX LEFT” keys
simultaneously will move the tables one position/index to the
left.
+
Pressing the “ADJUST” and the “INDEX RIGHT” keys
simultaneously will move the tables one position/index to the
right.
The “RAISE/LOWER” key raises or lowers the screen
depending on its initial position.
Pressing the “SQUEEGEE CARRIAGE MOVEMENT” key
moves the squeegee carriage once, either forwards or backwards
depending on its initial position..
Pressing the “PRINT CYCLE” key starts one complete cycle of
the respective print station.
(e.g. flood/machine
lower/print/machine raise)
The “LOCK” key is used to lock/unlock the screen
pneumatically.
“PRINT ADJUST” changes the function of the station among
print station, dryer and OFF.
With “DRYER ADJUST” the following empty station will be
activated as dryer station or disabled.
Pressing “DRYER CYCLE” starts a dryer cycle on the
following empty station.
