Operating Instructions Synchroprint 5000
Operating instructions SP5000 V1-0.docx
Page 25 of 52
7.9.3.
Submenu:
For additional settings a submenu can be called up by first pressing the right turning knob, keep it
pressed and then press the left turning knob.
Turning the left knob changes the selected parameter. To choose parameter press the left knob,
turning the right knob will change the value. Press the right knob to safes the changes. Press the left
knob to return to initial value. Exit submenu with button “ADJUST”.
The following parameters are available:
„Color Type“: Adjust the used ink. At Plastisol print cycle will start with flood stroke
followed by a print stroke. Waterbased starts with a print stroke followed by a flood stroke.
„Sque Delay“:
Delay time for squeegee movement. Time is necessary to bring squeegee
in down position before movement starts. Enter in 1/100 of a second.
„SqueMidFront“: Switching time for outer center position. Enter in 1/100 of a second.
„SqueMidRear“ Switching time for inner center position. Enter in 1/100 of a second.
„LiftDelay“:
Delay time for lifting or lowering the screen. Enter in 1/100 of a second.
